If they start to flash it usually indicates some sort of problem. If your Shark vacuum has headlights they’ll be located on top of the vacuum head and they’re used to light up the area in front of the vacuum so you can see the area to clean. If a Shark vacuum has been operating for a long period of time the motor can overheat which is common practice and nothing to worry about as long as you allow it time to cool down before restarting it. If, after the 45 minute cool down period, the vacuum starts working again, then it was overheating and you’re now fine to proceed. If you suspect the problem is overheating, you should turn it off and allow at least 45 minutes before trying it again. If you’ve been vacuuming for a while and the red light starts to flash it almost certainly indicates the vacuum is overheating. The belt drives the brush roll so any problem with the belt will result in the brush roll not operating correctly. You’ll need to remove all of this debris by hand (scissors will help if you’re careful not to damage the roller or vacuum in any way).Įither the belt is stretched, damaged, broken or sometimes just has something caught in it that obstructs the correct movement of the belt. The roller can get clogged with hair, string, cotton, carpet strands or just general stringy dirt and debris. Every time you vacuum you run the risk of jamming the brush roller. If the appliance won’t start or stops immediately after starting, it’s likely to be the brush roller that’s causing the problem. Any time you see a red flashing light it’s indicative of a problem, however, it doesn’t signify a specific problem and could mean one of the following Red Flashing LightĪ red light means danger or in this case a problem with your Shark vacuum.
SHARK DUO CLEAN VACUUM BRUSH ROLL INDICATOR LIGHT GREEN FREE
When the green light is visible you are free to vacuum at will. The green light indicates the power is on and everything is working as it should.
Once it’s fully charged you will see a continuous blue light. Blue flashing lights are normal when your cordless Shark vacuum is charging. These are charging lights and indicate that the vacuum is currently charging.
What Do The Lights Indicate On A Shark Vacuum?.Others have a “ carpet” or “ hard floors” setting.The right position depends on Shark vacuum models: If your Shark vacuum has a floor selector switch to activate the brush roll, check if it’s turned on in the right position. Shark Vacuum Roller Brush Not Spinning: Possible Reasons and Troubleshooting Tips Reason 1: Brush Roll Switch Not Turned On If not, I suggest contacting Shark company directly as there may be a problem with your specific model. Whether you own a Shark Rotator, DuoClean, Shark Apex, or Navigator LiftAway, this guide will surely be of help. However, to make things easier for you, I’ve done some research and listed all the possible issues and solutions. To be honest, I haven’t experienced all the possible reasons for this problem with my Shark Navigator since it may vary depending on Shark vacuums model.
If you have a shark, you probably already encountered the “shark-vacuum-brush-not-spinning” issue.Īs a happy owner of a Shark Navigator Lift Away, I’m well aware of this problem.Īnd if you don’t have a second vacuum cleaner (no judgment here) on hand, you’ll need to get it fixed quickly.
0 kommentar(er)
